Skip to report
Chief / Tech design builder · tech-builder.bettter.us13 Nov 2026

Catarina's 12 Nov lab notes: v0.8.6 is live on the lab and the engine

All 31 notes (tb-0073 to tb-0103) are integrated on every brand and design and answered in the lab inbox: 26 done, 5 seen with a question back to her.

Merged · deployed · live on prod and QA (verified)

Her 31 notes, by what they were about

Flats (drawings of the design)10 notes
Brand and piece pages, 3D11 notes
The pattern (hems, facing, sleeves)9 notes
Fit (S chest per fit)1 notes
Source: Lab feedback store (feedbackops), 13 Nov 2026 after closing; replies in dxfbuilder/feedback_answers.json

How each note was answered

Done (checked on the live lab first)26 notes
Seen, with a question back to Catarina5 notes
Source: feedbackops close, 13 Nov 2026 00:47 UTC; inbox shows 0 new after

The facing keeps its hem; the vent's V is gone

trembita-ukraine-2 facing and back pattern pieces before and after: before, the facing lost its hem allowance and the back hem had a V cut at the vent; now the facing keeps the raw material's own hem and the V is closed
trembita-ukraine-2 pattern, lab run 15 (v0.8.5) vs run 16 (v0.8.6), drawn by the lab. tb-0074, tb-0094, tb-0095.

Flats: straight sleeves, the V meets above the button

trembita-ukraine-1 technical flat front before and after: before, flared sleeves and a V open down to the button; now straight sleeves and a V that meets above the button with the front lapping over
trembita-ukraine-1 flat, run 15 vs run 16. tb-0078, tb-0092, tb-0103.

The cut-away's button where its curve starts

gieves-hawkes-1 AI preview before and after: before, the button sits low near the hem; now it sits where the cut-away curve begins
gieves-hawkes-1 AI preview (Codex image tool, ChatGPT subscription), before and after; the pattern got a new buttonhole there. tb-0100.

How it shipped (13 Nov, UTC)

  1. Engine gate 7/7

    local, prod and QA libraries, 00:24

  2. PR #37 merged

    8a42770, 00:44; 302 tests passed

  3. Lab deployed

    00:45; widget 1.2.0 kept

  4. Server gates 7/7

    prod and QA vs live v0.8.5

  5. Live

    promoted via the control room, 00:54

  6. 31 replies

    26 done, 5 seen

Waiting for Catarina (5 notes marked seen)
  • tb-0088, tb-0089, tb-0091 (Braga sleeves): can Braga's raw material be digitised? The library has no DXF for any Braga, Mayer or Gieves & Hawkes garment (0 of 15, 0 of 27, 0 of 10), so their sleeves are other brands' sleeves graded to their measurements.
  • tb-0097 (trembita-ukraine-3): is the sleeve curve right now, or what is wrong with it?
  • tb-0077: keep improving the 3D, or stop it?
  • Still open from 12 Nov: the keep limit in cm (4 cm meanwhile, labelled a default).
What changed, note by note
  • Fit (tb-0073): her S chest per fit replaces the defaults: fitted below 47 cm, regular 47–53.5, oversized above 53.5. A fitted chest over its range is not adjusted: 'Team decides' with her three options (mayer-1 and mayer-3: 52.6 cm, 5.6 cm over).
  • Pattern (tb-0074, 0086, 0095): a re-cut piece keeps the raw material's own cutting line on every edge the design does not touch, so the facing keeps its hem.
  • Pattern (tb-0090, 0091): every hem allowance is the piece above the fold mirrored about it; no steps at the sleeve hems.
  • Pattern (tb-0094): a V cut into the hem allowance at the vent is closed.
  • Pattern (tb-0088, 0089, 0091, 0097): estimated sleeves are graded below the cap (the cap keeps its shape) and small bumps are smoothed.
  • Flats (tb-0078, 0092, 0093, 0096, 0098–0103): straight sleeves and sides, the V as open as the pattern, the lap meeting above the top button, pockets running onto the side panel, the shawl collar joined to the shoulders, the chest pocket clear of it.
  • Cut-away (tb-0100): the curve cut the top buttonhole to a 10 mm stub; a new buttonhole is made where the curve starts, and the AI brief now places it there.
  • Pages (tb-0079, 0080): past adaptations grouped by approach; Mayer 0 minimum intervention, 7 partial, 13 full refit.
  • Pages (tb-0081–0085, 0087): waist taken in is conditional; record vs photo colours flagged (Mayer 0101-B looks light grey, 0101-1-B taupe); the stock × master matrix and the master lists are off the lab.
Verification
  • Full test suite: 302 passed on the merged branch (ef7ddaf).
  • Engine gates: local 7/7 on prod and QA libraries; server gates on build 8a42770 7/7 on prod and QA, not lower than live v0.8.5.
  • Live engine: channels.json shows v0.8.6 live on prod and QA; /v1/info answers v0.8.6.
  • Live lab: build 8a42770; widget 1.2.0 byte-identical to main; all 31 ?feedback= links answer 200 (tb-0083's old stock page is removed, as she asked: its link opens the brand page); pattern drawings and the gieves-hawkes-1 preview are run 16's.
  • Browser (local browser-use, own headless Chrome): no broken images, no horizontal overflow at 1400 px and 390 px; ?feedback=tb-0100 opens the reply on the page.
  • Every claim in the replies was checked in the live pages' text before closing; inbox: 0 new after.
Not done
  • Braga, Mayer and Gieves & Hawkes sleeves stay estimates until those garments are digitised.
  • The 3D is unchanged in structure (keep or stop asked).
  • Whether the pattern team finds the new patterns and flats right: they will say on the lab.